Flex Antenna

Numerous people on several yahoogroups, of which I am a member,
have commented about the need for a flexible HF antenna.
This is a prototype antenna I built up from material on hand.

The antenna shown has approximately 20" of tubing.
The analyzer says it is resonant on 6M and 70cm.
On the air tests with the Yaesu FT-817 show this to be true in operating as well.

Variation: use a section of 3/8" x 24TPI bolt instead of the aluminum wire. Warm the vinyl so you can work the bolt head into the tubing. Use a ring connector on the wire at the bolt end. Tape the wire to the tubing around the bolt head to help secure everything.